this is ma first try at a BediniMotor Window Type.
it came out very well if i might say so ma self...:))
the shaft has no bearings yet...depends what the speed is.
if it go screaming like the Daftman version than ima put some bearings in it.
i`ve know u heard it alot but once again "Thnx Daftman for ur vids"...u r a good teacher...:D
2 weeks ago i didnt know nothing about these things & look at me now...
building like a MAD-man...but its alot of fun.


gonna do the wires 2day...hopefully i have enough 4 50 turn like the Daftman 1.
gonna do them both bifiliar and 1 clockwise(above 1) & the other anti-clockwise(bottom 1).


finally ma Neo-magnetes has arrived...and man these ones r nasty...its like magnetes on steriods...haha.
very strong indeed.


this ma Window setup with same Bedini Circuit by theDaftman...its not running at this moment...dont know why...maybe wrong wirering or loose connection.
see the pics 4 info.
maybe its the 2 big of a space between the magnetes and the coils that r the problem...
i`ve put 4 Neo on the rotor...see pic.
and yes ma wirerings colors r still confusing...just using what i have.


1 thing is 4sure...it does give alot more Bemf...even when i spin it by hand...9.17v at this low RPM.
input is 11.74v
thats is so cool...like always...cant w8 4 it 2 run...:D


why 7 of those Caps...well why not...:))


see Pic below for wirering Diagram 4 that Voltage regulator.
hope it make some sence...if not?? well that is possible...:)


REMEMBER i am not a expert on these things.
but it does work...:)






no need 2 explain...it has been dismanteld...time 2 move on...fast lane...:D


ather some pointers from DadHav...i wound 1 big coil clockwise about 150/160 turns...Run wire 1.0mm & Trigger wire 0.6mm.


another shot from a different angle...2day was a good sunny day...so i work on ma balkony...:D


i dont get scared easy...but this thing here wont start at first but when she got going.....helllp...it was jumping like a kangaroo all over tha place...}:-)
look at that max RPM...its insane(awesome)...still shitty bearing tho(i mean no bearings at all)...like a 67 chevy on hydrolics pump...:))
i cant make a vid from this...sorry 4 that...2 dangerous...when i remake it with a good balance shaft, bearings and all that i will make a vid...;-)


Cheers & Tumbs Up 4 The Daftman